Thank you..... Yup found loose return cool line to turbo ! As a very (very) old gear head the electronics are like m,y phone... a lot smarter than me....
Service ElectronicThrottle is a generic code for these trucks. A very common issue is the connection with cabling underneath the truck below the driver’s seat. It is along the rail. Disconnect your battery, open up that connection and put dialectic grease on the connections. Another issue is...
...everyone,
Long time listener, first time caller, I have a 2017 1500 with 143,000 mi and my truck lost power with the Service ElectronicThrottle Control warning on the dash. I limped home from work and checked here first and watched some videos. Most common thing I saw was to clean the EGR...
My truck did the same thing last month. It's the crankshaft position sensor. In order to fix it your going to have to remove the transmission. . . Hopefully your engine is ok....might need a new one too.
Just received a quote to replace/service the electronic control - $1200.00 Any word that RAM will cover any of these costs? I have a 2015 pickup, 122K miles that I expected to last at least another 80,000 miles. After 20 recalls you would think lemon laws would kick in. My plan now is to have...
Update…I replace the MAP Sensor and the truck started right up with no issues. I purchased the MAP Sensor new on Ebay for $34, Dodge and AutoZone wanted $300 plus for the same part…crazy!
Last week my 2015 Ram 1500 EcoDiesel would crank but wouldn’t start. A message popped up “Service ElectronicThrottle Control”. I cleaned the MAP sensor, EGR tube and the ElectronicThrottle Body of all soot. Afterwards the truck started right up and then the truck a day latter started doing the...
Good evening all,
The ETC warning light came on out of nowhere this past week. Turned off my 2018 Ecodiesel and when I went to turn it back on the truck was having trouble starting. Called the dealer and was thinking it was fuel pressure related as I got my high pressure fuel pump replaced...
...driving it got it home..next morning I had to go into town, pickup started fine went to get out on the highway and my service electronicthrottle sensor came on. And put me into limp mode. I've tried clearing the codes to get it to Regen with no prevail. I've bought new code readers, used...
That's a common problem if there's over 150,000 miles. When the service light is on the truck cannot Regen. I just had to have the throttle valve replaced. Once that was done the truck was able to regen and my service light has been off. $198,000 miles and it's running good now. The other...
My truck quit started cutting out on me as I was going down the freeway yesterday. A check electronicthrottle control warning came on. I made it about another twenty miles after trying a handful of times trying to get to a good place to possibly leave it instead of on the side of the freeway...
The coolant bypass valve P26A7 , P2683, P2681, were all coming on a few days before I had any ElectronicThrottle Control issues coming up. I had ordered a new coolant bypass valve but had not came in yet. I had the coolant level marked on my burp tank and it has not changed. The coolant bypass...
...here as well. 2018 Big Horn, 143250km Deleted and stage 2 tuning (EGR Not deleted) this week, and then, 200km later, "Service ElectronicThrottle Control" (NO MIL). No codes. No power when stepping on the gas but it moves, not in total limp mode. I've been reading the forums for hours...
In most cases after deleting, "Service ElectronicThrottle Control" (NO MIL) was not handle correctly in the Delete Tuning... Also check all connections under the hood and Dash.
...We had our 2015 eco diesel deleted a few months ago and it was running good.
Now we keep getting an error message "Service ElectronicThrottle Control". It has been in and out of the shop. On one seems to know what to do.
Replaced the battery...no help. At our wits end here.
Anyone...
...miles, always regular maintenance and recalls handled at Dodge dealer. On a recent trip, it showed message that said “service electronicthrottle control” and I lost significant power, acted like it had a governor on it. We found a dealer on the route and they were able to get it in for...
...with the P0336. The truck still cranks and starts, I started by having my local shop swap out the crankshaft sensor and tone ring. They completed the job, but the code is still there along with the service electronicthrottle body. Any clue on what could be causing the code to remain?
Thanks!