• Welcome to EcoDieselRam.com We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your EcoDiesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • We believe in quality OVER quantity, and a family friendly place for your #EcoDiesel home!
    CLICK HERE TO REGISTER! Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

EGR Delete Question

-STIGLITZ-

-STIGLITZ-

Active Member
Nov 17, 2019
145
45
Truck Year
2017
Hello All!

I’m about 90% finished with my full delete. I go to remove the EGR tube from behind the engine annnddd...I sheer a bolt...is there anything wrong with slapping a gasket and plate on the end of the EGR tube? Or do you have to remove it?44CE6D4C-F6D4-4F48-93A1-B5855B171FB6.jpeg
 
T

Tremper126

Moderator
Staff member
Feb 15, 2019
915
333
Truck Year
2014
I would try to get the old bolt out or drill and get a nut on the backside. Heat and pressure will fatigue it eventually.
 
-STIGLITZ-

-STIGLITZ-

Active Member
Nov 17, 2019
145
45
Truck Year
2017
Yeah...I figured as much. I’m going to Dremel a slot in the bolt and use a flat head. Thanks!
 
J

John

Well-Known Member
Nov 13, 2015
1,186
386
I believe the gasket and plate is fine as long as you can rig=up a support bracket for the tube.
 
You must log in or register to reply here.
Top