• Welcome to EcoDieselRam.com We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your EcoDiesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • We believe in quality OVER quantity, and a family friendly place for your #EcoDiesel home!
    CLICK HERE TO REGISTER! Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Installed oil catch can - CEL light came on

magagal

New Member
Apr 1, 2024
1
0
Truck Year
2016
2016 114K miles. Should I be concerned? It makes no sense why there would be an issue other than the system being ultra-sensitive. Should we ignore it or bypass the catch can, get the tune and try again? Any experience with this? (I tried finding an existing thread on this topic and nothing was obvious).
 

Tremper126

Moderator
Staff member
Feb 15, 2019
915
333
Truck Year
2014
It’s a common occurrence with this mod for some reason. Some haven’t had a code but most do. Some have found oversizing the lines have helped the code
 

SeanPwnery

Member
Nov 30, 2022
69
19
Truck Year
2016
Question, what line did you install the can in between? I'm considering doing this on the PCV side of the system since my tune already closed off the EGR.
 

Tremper126

Moderator
Staff member
Feb 15, 2019
915
333
Truck Year
2014
I’m unaware of anyone who has done it on anything other than the pcv side as the idea behind it is to stop oil from cycling through the intake air side of the turbo.
 
Top