• Welcome to EcoDieselRam.com We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your EcoDiesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • We believe in quality OVER quantity, and a family friendly place for your #EcoDiesel home!
    CLICK HERE TO REGISTER! Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Oil Presure

TMT

New Member
Feb 23, 2024
2
0
Truck Year
2022
I have 2022 Ram ecodiesel. When cruising at 1200 rpm 60 mph oil temp is 218 which I think is fine. But my oil pressure is at 27. Is that normal. Idle pressure is 19. I am in Fla. Outside temp is 75. Would like to know if anyone else is having this typos presure
 

GearHead

Active Member
Sep 13, 2016
380
133
Truck Year
2014
I have 2022 Ram ecodiesel. When cruising at 1200 rpm 60 mph oil temp is 218 which I think is fine. But my oil pressure is at 27. Is that normal. Idle pressure is 19. I am in Fla. Outside temp is 75. Would like to know if anyone else is having this typos presure
Good news/Bad news kind of answer here. This engine has an off/on switch for oil pressure, once oil pressure exceeds 12 psi the ECM/PCM says all is good. The pressure you see on your dash gauge and the Vehicle Data Center is a computer algorithm estimating what the oil pressure should be at a given engine temp./RPM/Throttle position, no correlation with reality. I seem to remember a couple of threads here that detail how to get an aftermarket direct oil pressure gauge set up on your vehicle. Much better arrangement.

Good Luck.
 

TMT

New Member
Feb 23, 2024
2
0
Truck Year
2022
Thank You for the response. Knowing that it’s not a actual oil pressure reading, I am still curious at what other people psi is showing on there truck. With the factory gauge.
 

TC Diesel

Well-Known Member
Jul 14, 2016
2,453
694
Truck Year
2015
The Factory Gage is L-O-M they all will say the same PSI that program algorithm after 8/12 PSI.
 

Attachments

  • ED oil Gage1.jpg
    ED oil Gage1.jpg
    199.4 KB · Views: 5
Top