Different diffusor pipe design - u-pipe design so the air is forced to go down to a fatter pipe area at lowest point to prevent blockage and allow deposits to cool there" and the air travels back up through a spiral helical pipe before the intake.
If I am following the stock program and getting proper dealer maintenance intervals and also know what the carbon(SOOT)is doing to the engine (AND the FCA and owners too!) how come there is no EGR design change to trap the soot. I have read and watched every idea out there from EGR Deletes to...
Anyone else use a moroso catch can besides a Provent 200 without codes? Anyone buy CFT performance catch can and no codes? Trying to not delete the EGR, and use GDE hot tune etc... in Canada and just grab the darn black soot before it makes it back to the swirl valves and intake! I took off my...
3/4"inch pipe to 1" pipe. tight connections? and your micro filter of catch can maybe the issue. Some have had to drill a small hole in filter due to restriction.
2018 SLT Crew with SOOT on EGR pipe and had AEM ECU redone by Chrysler.
What should be done (for us Canadians);
Add more insulation around turbo intake area/EGR pipe end into Manifold-keep temps the same!
Add the Crumb (Shawn mopardiesel.com) with steal mesh screen on EGR pipe intake end.
Add...
MAP (Mass Air Pressure- found at rear of engine, beside the air pipe leading into turbo) will be the guilty party, not likely MAF (part of the air box). My truck is still under warranty and when I brought it in for an oil change (13 oil changes on the purchase price) but the dealer did a program...
Isn't the flashing the dealer did to have 2018's not be part of this change the milage rated on the sticker price now? Do I get rebate or gas Cheque now? just like the Kia Soul of the past??????
I have a 2018 Ecodiesel SLT with 43000km. I see the soot build up on diffusor pipe! I assume the soot blown into the block will royally gum up the valves!!!!! What can be done for cleaning the crap out safely? The pip is an easy clean but how to clean the block and valves without doing any...