• Welcome to EcoDieselRam.com We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your EcoDiesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • We believe in quality OVER quantity, and a family friendly place for your #EcoDiesel home!
    CLICK HERE TO REGISTER! Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Recent content by pcravens

  1. P

    Here we go again 3 years in a row 3 way coolant bypass

    was flushed and new 3 years ago and then last year I did it again. I drained the radiator this time and refilled it.
  2. P

    Here we go again 3 years in a row 3 way coolant bypass

    The dealer ship put one on when i bought it from them , the next one I had to replace i bought from the dealer over 200 the next 2 i bought off line for around 60 each and all of them only last around a year.
  3. P

    Here we go again 3 years in a row 3 way coolant bypass

    Had a new one put on when I bought the truck used from a dealer. and now the last 3 years in a row i have had to change it out. i have replaced it out 2 times with oem and 2 aftermarket parts. every time it goes out i get it ordered and within a few days my truck will start letting the codes...
  4. P

    Driving and truck shuts down to limp mode

    I have ran my truck a week now and no issues since I changes the coolant bypass valve. Dont know why that would cause all my problems but if anyone can explain why please do.
  5. P

    Driving and truck shuts down to limp mode

    put new coolant bypass valve on and not one code since replacing. Normally it comes on after 10 to 15 minutes of driving. Put over 200 miles on it since then. Hope that was the issue.
  6. P

    Driving and truck shuts down to limp mode

    The coolant bypass valve P26A7 , P2683, P2681, were all coming on a few days before I had any Electronic Throttle Control issues coming up. I had ordered a new coolant bypass valve but had not came in yet. I had the coolant level marked on my burp tank and it has not changed. The coolant bypass...
  7. P

    Driving and truck shuts down to limp mode

    just pulled MAP sensor and EGR cross over pipe both in good shape very little soot on crossover pipe and MAP was clean
  8. P

    Service throttle

    same issue but with lots of codes
  9. P

    Driving and truck shuts down to limp mode

    Was driving and the Eletronic Throttle Control came up. Pulled over tried a few things but no change i did not have my scanner with me. I limped back home and parked it for 2 weeks. Got back home and pulled the codes P26A7 Engine coolant Bypass valve 1 position sensor circuit high , P2683...
  10. P

    Air ride to Strutmasters

    finally got my Strutmasters on front and rear. Not a as easy as they make it out to be but not too bad. I am impressed with the ride and truck actually sits higher than before. The best thing is it sits level and don't have to worry about all the codes it throws and ever having to mess with the...
  11. P

    Air ride to Strutmasters

    i ordered the Strutmasters will be delivered tomorrow 11/25 hope to get on this week
  12. P

    Air ride to Strutmasters

    Has anyone used this set up. I am tired of fooling with the air ride constantly putting money into it.
  13. P

    2017 air ride pump and air block replacement

    My truck driver side was leaning on the driver side. When I started truck nothing changed so i figured the air pump and manifold block was bad. It did give me a suspension code. I bought a new pump and block replaced them and now I have no codes but my truck front is like a low rider and the...
  14. P

    NEW HPFP installed still throwing code p026c

    Does anyone know if the new fuel pump has more or less pressure or volume change. The dealer has checked they said everything that could cause the code. They did notice the truck at times has serious acceleration issues and i told them that when i took it in , that started when they also...
  15. P

    HP fuel pump recall now new codes

    i just had the high pressure fuel pump recall done. The next day I start getting the p026c code. took my truck to dealer and they said they could not find any issues. Now i have had the code 3 times in the last 5 days. took back to dealer this morning hope they find the problem. if they dont...
Top