Search results

On our factory suspension there are links such as these that are solid that are attached to the leveling sensors on our suspension. These are an adjustable height variant of the factory casted links. Therefore it allows you to set the ride height of any desired wheel up to 2.5" (I think this is...

Mine is a late 2015 and I had recently received the USB recall update. I saw what this whole recall was about a while back, before some large computer hacking convention someone had found a code to access their 2014 dart I believe it was. They were able to start and stop the vehicle etc...

I keep mine at 39 cold. Runs about 41-42 warmed up on the highway. Sometimes I have to add a touch of air to hit 45 when I have heavy payload. No issues and nice even wear

These little boxes were a life saver when I finally found them! Straps and other the Downs, receivers, and a tarp in the other side. Under seat only fits the jumper cables a clevis and a receiver. Tightly. Oh and you can stuff a tow strap under the passenger seat with the Jack as long as you...

Just drive it. Work it. Fuel it up. Wash it on occasion. And change the oil. :)

http://www.bullysperformance.com/index.php?main_page=product_info&products_id=50743

Every one talks so highly of the coils for ride quality but I have air as well and I'm extremely happy. But it does have a bit too much squish depending what you are doing. Pulling into my driveway per say coming over the curb causes a lot of body roll. It's soft like that that I know the coils...

I've got a drain valve en route to add this time when I do my next oil change. Doing them between 6-8k miles, so I'm due, 14xxx currently. Hopefully the drain valve makes it even easier

Champion SynGold is also now available and meets all specs. I found it for about 41$ per 6/qts shipped. From Auto anything. About 160$ for 4x enough for two oil changes and a 3 pack of oil filters from the company Shawn recommends. Though there is a tiny tiny size deviation in length that...

I just trimmed it as small as I could. A tiny touch of silicone and it's perfect for me.

That's exactly it. Not hard. Just time consuming.

His video is shown on a gasser which is different under the Hood because we have a much different cooling system intake etc. And installing the ballast in the headlight housing's means you only need to mount the resistor and run the harness from the battery. That is what simplifies the system...

Here is the Retroshop video of how I did the install. I hope this helps. Except enlight actually uses the right bulbs. No trimming. Just plug and play

This is the upgraded ballast. And you are right about the fog lights. That's why most people opt for the ribbon style led because it can be stuffed inside and the ribbon is a flexible heat sink. I'm going to ask about this fitment in the housing tomorrow. And actually the grill removal is very...

Anyone with springs or a lift the light bar in this location would be great, it's hardly lower than the air dam already is. But I have the air and I have to be mindful if I ever put it in entry mode when the front is parked over a high curb because it could crunch down right on it. I haven't...

Our factory fog lights.. well... they suck. It's a low wide beam, but it's not very intense, and it's not bright enough to really help much. They are something that is just always on when you have your halogens because it actually lights up a little bit more which you need at night because the...

So I actually have a brand new light bar same as this in box I've never opened. I'm considering removing mine as it is currently. It was kind of an inexpensive alternative to the HID at the time. It does fit up great with the shape of the bumper. If anyone were really serious about wanting it I...

The low beam stays on when you turn your bright's on so it's not necessary at all. And fogs are on my to do list. I think I'm going to try enlights new led fog kit as I've been very satisfied with this but eventually I want to put the LED cube brackets in place of fogs with rigid industries DOT...

Yup that truck right there is my only soft spot to the ED. Damn does that truck stand out and make it's presence known. Beautiful truck whoever's it was.

Yeah the 3m was available when I got it and provided warranty. Just had to be resprayed every 3 years. I opted against it. Wish I had gotten my grill and bumper done