• Welcome to EcoDieselRam.com We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your EcoDiesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • We believe in quality OVER quantity, and a family friendly place for your #EcoDiesel home!
    CLICK HERE TO REGISTER! Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Search results

  1. T

    Vibration damper bolt

    Try an impact. Also a good thick wall socket is needed to get these bolts off sometimes.
  2. T

    P24C2

    Check your three exhaust flange bolts near the passenger side front floor board to see if they are in tact, if those are good you most likely have a sensor going bad in the exhaust. Keep in mind that these sensors also impact your trucks ability to regen, so it won’t regenerate until fixed and...
  3. T

    P06bb and P0673, glow plug #3 replacement

    Bio, I thought the same thing, took mine to the dealer and they quoted me 13k cause it was going to break off in the head… found a heavy equippment mechanic who did it at his house for 500$
  4. T

    Help

    Should be near the accumulator
  5. T

    3”/2” leveling kit

    Both pics are with 35/1250R20 Top is 2” rough country leveling kit Bottom is 2” kit and 1.5” body lift. Tires slight rub with 1-1/2” spacers but doesn’t bother me.
  6. T

    P06bb and P0673, glow plug #3 replacement

    165k and Mines been intermittent when I remote start, never with key, I cycle key from on to off and back on real quick while in park at idle so engine doesn’t shut down and it doesn’t set the code. I did my #4 when it would sporadically flash on while driving
  7. T

    Damn Electronic Throttle Control!!!

    My guess? Tone ring failure.
  8. T

    ChillBill

    Welcome!
  9. T

    Hello 2015 and 16 owner

    I drove mine with a stripped plug for around 500 miles hoping it would shoot itself out and it never did. But there’s always a possibility for it. Plug it back up and hopefully the truck regens as it should
  10. T

    Turbo flutter noise and turbo bark

    I too get the whirring sound when decelerating, assuming it’s the vgt vanes closing on the turbo, also around 55-65 mph I get your described sound. Very prevalent when I’m pulling a trailer. I discovered mine very similarly coming back from nj with 3k enclosed trailer. The only thing I did since...
  11. T

    2021 High Pressure Fuel Pump Failure

    Cp4 fuel pumps are notorious for it when poorly lubricated fuel is used
  12. T

    HELP 4x4 Issues

    I’d assume a short under the frame somewhere
  13. T

    Eco smoking

    Sounds like an injector issue
  14. T

    Oil change problem

    Takes a decent amount of for it to break loose. Maybe an oil filter strap?
  15. T

    Service electronic throttle control.????

    Had it happen yesterday to me, no codes, few in the bcm for random stuff. Reset and good to go
  16. T

    Turn signal issues

    I had an issue when I added led headlights and fog lights with my truck telling me my reverse bulbs (led)were out when they had been led since I bought the truck. I added the error message cancellers to the headlamps and haven’t had another issue. These trucks are very sensitive and don’t like...
  17. T

    Truck problems

    @John Jensen wasnt there mixed reviews as to that true recall? Iirc the recalls drops power and allows power to a safe spot, not nessasarily full power or ability to restart.
  18. T

    grounds

    What codes?
  19. T

    E.T.C light

    If I tow a heavy trailer with my eco and don’t manually shift when taking off, I’ll get a P04DB Code every. Friggin. Time. I found that with my larger tires, and the transmission tune, it makes my engine lug and throws the code. Just something I do out of habit. Now I’m not sure what your codes...
  20. T

    Intake manifold cleaner

    I’d check your map sensor first. Easy enough to get to and a simple step before intake removal. If your going to remove the intake to clean it would be easier to just replace with new
Top