• Welcome to EcoDieselRam.com We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your EcoDiesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • We believe in quality OVER quantity, and a family friendly place for your #EcoDiesel home!
    CLICK HERE TO REGISTER! Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

2014 eco longhorn Laramie

Robertz2

New Member
Nov 1, 2019
2
1
Truck Year
2014
Living in Minnesota and after a few years with the truck I just got the block heater cord put on. In the mean time just reciently I got the flashing message ‘diesel preheat in progress...’ I’ve seen some say glow plugs could be the culprit or possibly a bad connection. For the last few days I have been cycling the start start mode without starting it... maybe 3 or 4 times... has not flashed since, are the glow P’s as much of a pain as they were on my GMC 6.5?
 

TC Diesel

Well-Known Member
Jul 14, 2016
2,460
694
Truck Year
2015
They are worst and Break off and take out the engine. PITR to remove in most cases.
 
Top