• Welcome to EcoDieselRam.com We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your EcoDiesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • We believe in quality OVER quantity, and a family friendly place for your #EcoDiesel home!
    CLICK HERE TO REGISTER! Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

6th Cylinder glow plug

Ryan76

New Member
Aug 15, 2021
10
1
Truck Year
2015
Hello everyone I got a code regarding a bad 6 cylinder glow plug two Thursdays ago I brought it in the garage and began to replace the # six plug it was a little tough at first but worked it out. It was spinning on the top "freely" just would not come out. Since then over a week ago I go to work then work on removing it To 1 in the morning, last night I removed the left side fuel rail. I made a fitting that fits over the top of the plug with a slide hammer. It will not budge I bought a video scope and it's will not move a bit. With all the force Why won't the 4mm small piece of metal pop through. 2015 Bighorn 3.0 ecodisel. Any help on what I can do would be much appreciated thanks
 

Attachments

  • 16524911318373840979720471316551.jpg
    16524911318373840979720471316551.jpg
    157.2 KB · Views: 6
  • 16524917935196753546213279884498.jpg
    16524917935196753546213279884498.jpg
    282.5 KB · Views: 5
Top