• Welcome to EcoDieselRam.com We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your EcoDiesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • We believe in quality OVER quantity, and a family friendly place for your #EcoDiesel home!
    CLICK HERE TO REGISTER! Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Fuel issues 2014

Mavrik-The-Gent

New Member
Oct 30, 2021
6
2
Truck Year
2014
Truck died.
Diagnosed as a bad lift pump. Has less than 2psi.

Couldn't get one, so I installed an air dog aftermarket system, works great.

Upon checking the HPFP I noticed the quality sensor had a metal piece or two on it. So I replaced the pump to avoid any issues.

I also removed the fuel rails and inspected them. One at a time. Found no metal filings.
I removed the fuel filter and found none either.

I now have a crank no start issue. Was told by a local Mopar guy that I could just crank and go.

I've replaced high pressure pumps for Deere and we had to bleed everything.

Ideas?
Fuel pressure regulator?
 

Mavrik-The-Gent

New Member
Oct 30, 2021
6
2
Truck Year
2014
Any ideas? No local shop will touch these trucks so I'm pretty much on my own. The dealers are useless.
 
Top