I just had my in-tank fuel lift pump replaced and when I picked up my truck the CEL came on for P20FC and P05F2 codes. So, before I take it back Monday, can dropping the fuel tank to replace the pump, damage or disconnect any connections, wires, plugs and/or hoses that would cause those codes? Thanks
-
Welcome to EcoDieselRam.com We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your EcoDiesel truck!
- Post your own topics and reply to existing threads to help others out!
- We believe in quality OVER quantity, and a family friendly place for your #EcoDiesel home!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
Lift pump replacement and DEF CEL codes
- Thread starter EcoRama
- Start date
Tmckinney20
Active Member
- Nov 17, 2022
- 142
- 60
- Truck Year
- 2018
The first code yes, the second could, and probably is related but not directly a problem. The first will solve the second more than likely.
- Thread starter
- #3
Can you expand on what and where to check for an issue?
Tmckinney20
Active Member
- Nov 17, 2022
- 142
- 60
- Truck Year
- 2018
Well if they changed the pump, it is a bad connection somewhere. Could be a pinched wire, bad ground, or a connection that was not properly seated together. Hard to say exactly, but they should know where to look without charging you. More than likely it is in the tank or on top of it.