Search results

Was the SFT loaded when flashed at Dealer?

Yes......The ZF runs 180-220.

All Good....

That pump is available at $550.00 and takes less than 1 hrs to Install. The Used Lube good for rotating surfaces, but over time it will create more Ash in The SCR, now of course if the SCR is missing its not a problem.

Frank246, its likely the big connecter under the dash driver side. disconnect and re-connect...

Wait until that happens in Your Tesla, it won't be the local auto parts store fix.

HOAT and OAT is good for 10 Years or 150K miles, just flush it and replace. I've seen power plants with 800K miles or 12000 hrs with passage that were clean.

Z. The fanatical EPA and the current Admin were served a BIG blow buy the SC, they no longer can just set near 0 Measures or make wild claims like External EGR are required.... Once this is challenged in COURT the EPA will lose, it to risky for them to pursue right now. The current Lie-O-Cratic...

I would recommend it come with OAs, and have and Additional $5k for repairs available if needed. They are Hero Zero status power plant.

Snake Oil, The ratio's Need to be in the 2-4oz per-Gallon to have any effect.

The problem with CP4 (regardless of Ver) its unforgiving and very destructive unlike the CP3. Feed the CP4 with good lube and clean fuel it can reach 500K miles, why do I say that, because I have confirmed that on several CP4 replacements.

I would not trust anyone other than trained Techs for OAs... Big truck Shops have specific methods to gather the sample, The One Sample that shows High level of Sodium is because I did NOT brake clean My Fumoto Drain Valve and just the residual MN salt on the exterior surface on the valve from...

You need trends to establish Motor health. Copper, Silver, Alum, Iron levels.

OAs will allow time for decision(s)...We used them for years, never has a trend been false, also you do NOT condemn powerplants on 1 result, at times they are flukes. If the motor goes out of production you're really screwed, It's not like millions have been produced for the aftermarket to jump...

Its a Hero / Zero Motor, If the entire rotating mass is machined and tight tolerances are met it will last with proper maintenance. You still need to deal with all the other short comings on the 3.0VM. Is it worth the risk to You? Its likely that the New Hurricane Motor will end the VM 3.0...

Ryan check out that head...if the valves are warped. It's very common on OEM heads.. also I'd that plenum is gunk up replace it...here's what happens the swirl valves get all cake up stopping the cooler air from entering the intake port...the valves get hot from lack of incoming air.

Just remove...contrary to false stories...it does not need timing.

We'll its to late to tell Ya, this is not the engine for remote operation. leaving it sit for 3 months creates all sorts of problems, and likely will required someone who knows the work arounds.... AK is a long ways from MN. First check the in tank pump, remove the COV Cascade overflow valve...

Yep $$$$ in repairs.

Just shorten the life expectancy of Injectors and pump...how much less is just a guess.