• Welcome to EcoDieselRam.com We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your EcoDiesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • We believe in quality OVER quantity, and a family friendly place for your #EcoDiesel home!
    CLICK HERE TO REGISTER! Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Search results

  1. jdn112011

    Crank sensor/reluctor wheel

    Submit Repair proof to fca for reimbursement. Same happened to of; pre recall failure. Year later had the option to submit documentation
  2. jdn112011

    Crank sensor/reluctor wheel

    Cool that you did it; but it's a recalled and warrantied repair. You may be able to submit for reimbursement on the parts but because you did it yourself you're limited. It's unfortunate that it's a trans split job for tone wheel/crank position sensor but every Truck out there will be...
  3. jdn112011

    no power, no crank, no start?

    11v isn't going to start your Truck, charge, jump or replace your battery and go from there
  4. jdn112011

    Crankshaft positioning sensor and Tone Ring Failure on Eco diesel.

    Affirmative, same shit, so every 115k give or take you'll have a failure and have to split the transmission
  5. jdn112011

    Crankshaft positioning sensor and Tone Ring Failure on Eco diesel.

    Also curious what you mean by unexpectedly high maintenance costs? 100$ oil change at 9k interval, and a 40$ fuel filter ~annual? Differentials, and well that's all. Other than getting screwed with diesel prices the actual maintenance costs are at or below norm
  6. jdn112011

    Crankshaft positioning sensor and Tone Ring Failure on Eco diesel.

    Yeaaaa ain't got one of those, my used oil isn't sooty bs. And it goes straight back into the clean 2.5 from the past oil change. Accounting for that and the pretty fine filtration of the ecodiesel's fuel filter I wasn't worried to much about causing injector issues unless I tried dumping it in...
  7. jdn112011

    Cp4.2 recall letter

    January I was having excess noise from my pump especially if below 1/4 tank like it was cavatating. Late winter after a few months running #1. This was back in February and I had the dealer order a pump, was supposed to be a week ended up being 3 months. I said screw it honestly wasn't worth (to...
  8. jdn112011

    Crankshaft positioning sensor and Tone Ring Failure on Eco diesel.

    I just came to chat about this; I was having excess noise from my pump especially if below 1/4 tank like it was cavatating. Late winter after a few months running #1. This was back in February and I had the dealer order a pump, was supposed to be a week ended up being 3 months. I said screw it...
  9. jdn112011

    P06bb and P0673, glow plug #3 replacement

    Well cold engine and a patient hour racking my knuckles I got er done. Bunch of wd40 did the trick. 1/4" breaker bar with extension and 8mm deep well (Make sure the hex is full length or most of the socket to fully seat the hex, Stanley's weren't, ol harbor freight Pittsburgh was though.) The...
  10. jdn112011

    under warranty engine replacement due to glow plug

    And dealer installed crate engines get 3 year Warranty to boot
  11. jdn112011

    P06bb and P0673, glow plug #3 replacement

    Well just ticking 163k had this little guy show up. Guess I'll order one up and try it..
  12. jdn112011

    Damn Electronic Throttle Control!!!

    Yes sir that would be tone wheel or crank position sensor failure. You're at the target mileage.
  13. jdn112011

    Crankshaft positioning sensor and Tone Ring Failure on Eco diesel.

    It doesn't hold up in cold climates, it's a flawed system with no dryer. Vacuumed and nitrogen charged but atmospherically vented, so temp swings it brings in moisture which corrodes the valve body of the compressor, freeze thaw cycles and not fully seated valves constantly screws up the pump...
  14. jdn112011

    Crankshaft positioning sensor and Tone Ring Failure on Eco diesel.

    Absolutely Work them. Mine went on a diet about 80k so egr cooler can't leak from a box in storage 🤣 dealer bugs me about open recalls for that and aem though gets a good chuckle. After a year off heavy tow duty I finally had to see if old girl still had it. Miss the factory air suspension though.
  15. jdn112011

    Crankshaft positioning sensor and Tone Ring Failure on Eco diesel.

    About 1600 idle, 3400 driving 154k and the only actual failure being the tone wheel I'm not complaining much but the cost effectiveness of Repair definitely goes out the window when the crate gives so much more bang for the buck. I wouldn't have much problem throwing a fresh motor at it knowing...
  16. jdn112011

    Crankshaft positioning sensor and Tone Ring Failure on Eco diesel.

    No it's cp4.2 with hardened internals so less prone to failure, the pump is like 1700 or so, I was quoted 2500. So that price with rails is not bad. mine is getting noisier, can feel on the line to the rail it's banging fuel in so maybe cavitation occurring? And it will start squealing like...
  17. jdn112011

    Crankshaft positioning sensor and Tone Ring Failure on Eco diesel.

    Motor dies no restart, dead crank position sensor so crank no start until diagnosis and transmission split for Repair. The tone wheel is cheap but sensor if damaged or just doing it while it's open was like 600$ as well.
  18. jdn112011

    Crankshaft Sensor Failure

    Only if he's certified. Otherwise they'll maybe reimburse parts but that's all
  19. jdn112011

    2016 laramie ecodiesel cranks wont start

    It's possible yourself but with the recall and extended reimbursement it's Best to let a ram dealer Repair it. They had mine done in 2 days I believe. Also replaced rear main seal while in there
  20. jdn112011

    Crankshaft positioning sensor and Tone Ring Failure on Eco diesel.

    Same replacement part, has not been subbed yet. I wouldn't mind for the 200$ Bill you had, but no aem for myself as I'm deleted so I got it in the shorts. I'd assume that's the same composition transfered to the new generation engine
Top