Search results

OAs............. x2 tremper126, You have 2016 use 90% Distilled water and 10% DEF. My 2015 ED was on this diet of H20 for it 4.5 years of ownership. Lube changes every 6/8k Miles , No dart driving.

Depends on Year, each Year the battery detection software gets More complex. So I really don't know. What I do know is never add to any circuit, Start adding after market products like head lamp or tail lamp bulbs plus add lighting, New after market Radio and its only time before controls on...

I'm With biodiesel, move on. Yes any engine can be scan for changes outside of OEM Programming. Its unlikely that any Dealer Tech would volunteer to investigate on his Dime.

YES.........

Yes.

Alfa & MXII OBD. Alfa available for $59.00 Play Store the MX generally found on Amz. MX streams better with Andriods

The Fuel Rail sensor Is $120.00 and 1 Hr Book Time.... I have them in stock.. $800.00 is crazy... the sensor is easily checked VIA WITECH. Spider I suggest you move on .... its the curse of the VM3.0... (What's a CPM?)

1st get rid of the sound foam, Maybe that will help in locating the leak, The lift and feed lines travel on driver side TOP of engine to distribution/transition block along driver side rail down the back to tank.

Spider its extremely rare to find any person capable of the work arounds on the 3.0VM, generally what your describing is electronics. Still no answer on Injector pressure module , or what the heck they replaced.

You will not always trigger codes in HPCR systems in No start/Run conditions. ( Only when running ) The VM 3.0 is extremely difficult to diagnose and repair, The Power plant is manufactured in Cento Italy.... They are Hero's when running Zero's when NOT. My7 Do Yourself GOOD send it away...

What's the running Rail Pressure? if the CP4 cannot maintain 2200PSI it will die, CP4 or in tank pump. if its CP4 complete direct injection system will need to be replaced from in tank pump to Injectors, lift pressure must be above 50PSI or the COV will close to the combustion side of Pump...

You will be jointing the flamed Ecodiesels if you continue to drive the truck.

Hmmmm, Never heard of Injector pressure module on any VM 3.0. Unless the hard part(s) of the PCM are the problem just flash the PCM, if the flash does not load the PCM corrupted, other than that most PCMs are extreme robust and its extreme rare for them to just fail.

DO NOT paste and copy This for any other site USE, If I see it at 1500diesel.XXX I will deleted it Myself or have the Boostn or Temp delete it Dealer Service Instructions for: Safety Recall W58/NHTSA 20V-475Loss of CrankshaftPosition2014-2018(DS)Ram1500 Pickup2014-2018(WK)JeepGrand Cherokee...

Parts are $3,500.00- $3,800.00 in Parts ,labor $2,000.00- $2,200.00. $8900.00 Nuts.

300K Kilometers? yes , I forgot to mention miles in post #5 that's the scale. I would require proof on 300K miles on just routine maintenance, The EGR recall is not routine so that alone! knocks out just about every 3.0s on OEM.

My Policy for My 2015 Loaded Laramie 3.0DSL Vs My 2019 Limited 5.7 was 22.00 Per Month less. I agree the 1996 12V DSL bolted to the 47RE was problematic. That's why I and 10s of 1000s owner modded 47/48re's almost immediately after Purchase, at low cost for the life of ownership, Heck most...

BL2020, Your not alone, Many Owners have replace the power plant VM3.0 3 Times 2014-18. Its this simple, their are Hero's and Zero's VM 3.0 nothing in-between. In long term ownership in OEM, it will suck up your wallet. Why not just by 2500 Cummins and be done with it. I bleed DSL but these...

I used BT....when using WiFi. Its even better.