• Welcome to EcoDieselRam.com We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your EcoDiesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • We believe in quality OVER quantity, and a family friendly place for your #EcoDiesel home!
    CLICK HERE TO REGISTER! Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Cargo Bed Divider Part Number : 82215481

njoconnor

New Member
Mar 1, 2020
10
7
Truck Year
2020
Wondering if anyone has one of these. I'd like to know how close the bottom of the divider extends to the floor of the truck bed. I'm thinking of getting a Bedrug impact mat (3/4" thick), and I'm wondering if the divider will clear it.

Thanks. Pix of the new truck soon, I promise.....
 

Tremper126

Moderator
Staff member
Feb 15, 2019
908
331
Truck Year
2014
I have one but I don’t have the ram box. I think it sits flat on the bed with little feet
 

njoconnor

New Member
Mar 1, 2020
10
7
Truck Year
2020
Sounds like I'll skip it, unless there are adjustments to the feet. I don't have the Rambox either; according to the dealer, it's not needed for the divider, but the cargo management package (side rails with movable tie downs) is required, since the divider rides on those rails.

Thanks. If you find there's a way to adjust the clearance between the divider and the truck bed, I'd appreciate a post.

Just got the impact mat yesterday, but it's too cold in Wisconsin to apply the adhesive activator. Maybe next week....

Neil
 

Tremper126

Moderator
Staff member
Feb 15, 2019
908
331
Truck Year
2014
I took a few pics, you can unscrew the feet and it should sit flat. Not sure your location but it’s free if you want it lol
 

Attachments

  • BA3C6F1B-167C-45CC-B145-032B13516EEE.jpeg
    BA3C6F1B-167C-45CC-B145-032B13516EEE.jpeg
    349.7 KB · Views: 34
  • 4516BC22-C759-4942-B4D5-E03C27DC7972.jpeg
    4516BC22-C759-4942-B4D5-E03C27DC7972.jpeg
    376.5 KB · Views: 34
  • 771FCDC1-87C0-460F-ACC3-566BA8C1A86B.jpeg
    771FCDC1-87C0-460F-ACC3-566BA8C1A86B.jpeg
    342.3 KB · Views: 33

njoconnor

New Member
Mar 1, 2020
10
7
Truck Year
2020
Tremper....thanks. I've done some further digging, and it turns out the bed side rails were changed for the 2020 trucks, so I'm not sure your divider would fit the current rails. No feet on the current divider, and it's hard to tell from the install manual whether it sits flush or not.

Guess I'll call a couple dealers, see if one's in stock, and go toss a tape measure on it.

Thanks again

Neil
 
Top