• Welcome to EcoDieselRam.com We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your EcoDiesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • We believe in quality OVER quantity, and a family friendly place for your #EcoDiesel home!
    CLICK HERE TO REGISTER! Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Hi all. Have a 2014 with issues.

D

Derik

New Member
Joined
Jul 28, 2023
Messages
1
Reaction score
0
Truck Year
2014
I purchased this truck at an online auction a month ago. Is seemed to be an ok truck, but before I got home with I got a CEL and it seemed to go in to limp mode. I cleared the codes and drove on. I had to clear them a couple times before I got home, but the primary code is for a fuel rail pressure sensor.
Can somebody tell me how you release fuel pressure before removing the sensor? I was gonna pull the fuse and run the truck, but I don’t see a fuel pump fuse.
Any help would be appreciated and I’m sure I’ll have more questions.
 
Just shut engine off remove negative cable, in the time it takes to remove the cable press will be 0 PSI. The rail sensor is generally not the problem it's the electronic PRV.
 
There should be a schauder valve on the fuel rail just pock it with a pocket screw driver and make sure your face isn’t in the way of it.
 
You must log in or register to reply here.
Back
Top