• Welcome to EcoDieselRam.com We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your EcoDiesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • We believe in quality OVER quantity, and a family friendly place for your #EcoDiesel home!
    CLICK HERE TO REGISTER! Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Wheres the winch go on Iron Bull bumper?

Huntinrod

New Member
Aug 7, 2016
16
7
Truck Year
2016
I just got my Iron Bull bumper. I expected a winch plate/mounting bracket inside the bumper....theres nothing. Anybody have any idea where i bolt the winch to? Do i have to fab my own mounting plate/bracket? This sucks. I feel ripped off for ordering a "winch bumper" that has no place to mount the winch....it has the fairlead cut out but no mounting surface inside. Thoughts?

Sent from my SAMSUNG-SM-G890A using Tapatalk
 

Huntinrod

New Member
Aug 7, 2016
16
7
Truck Year
2016
I figured it out. I feel dumb. The winch actually mounts upside down (90 degrees) and to the inside front of the bumper.

Sent from my SAMSUNG-SM-G890A using Tapatalk
 

Huntinrod

New Member
Aug 7, 2016
16
7
Truck Year
2016
118d3ec6e1e628714e0d2dbe9a51191c.jpg


Heres where it goes. I thought it would mount flat...not laying on its "back" but it doesnt matter..still pulls the same i guess

Sent from my SAMSUNG-SM-G890A using Tapatalk
 

Huntinrod

New Member
Aug 7, 2016
16
7
Truck Year
2016
19a02f6734819cc96b087f458704ac85.jpg
8d5b2dc13e17c74dadad6d9ad513dd26.jpg
aa949ba186edc3391a0bd52863e526e2.jpg
cc9ec53cb6aa8b95503ceca50cdeb629.jpg


Got the Iron Bull bumper installed. Went fairly smooth. Grade 8 1/2 inch nuts n bolts. Had to open the holes a tad. Not really happy with the gap behind the headlight. Its about an inch gap. Oh well.

Sent from my SAMSUNG-SM-G890A using Tapatalk
 

Huntinrod

New Member
Aug 7, 2016
16
7
Truck Year
2016
4b5cfa6d6923069ba744acda5281cdee.jpg


Heres my favorite mod....i drilled a couple little holes in the bumper and fabbed a new bracket for the control box so i dont have to crawl under it to plug my temote in..

Sent from my SAMSUNG-SM-G890A using Tapatalk
 

Brady

Well-Known Member
Jun 7, 2015
1,051
424
Truck Year
2015
nicely done!

Sent from my SAMSUNG-SM-G891A using Tapatalk
 

Huntinrod

New Member
Aug 7, 2016
16
7
Truck Year
2016
Im going to shim the bottom with some washers....should close the gap

Sent from my SAMSUNG-SM-G890A using Tapatalk
 

flying7

Active Member
Jul 15, 2014
175
42
Truck Year
2014
looks really good, did the gap end up closing up better?
 

Huntinrod

New Member
Aug 7, 2016
16
7
Truck Year
2016
Yes. I shimmed the bottom bolts with three washers and that closed the gap nicely.

Sent from my SAMSUNG-SM-G890A using Tapatalk
 
Top