...3 (02 and NOx) due to delay in shipping of Cat Temp. Mechanic did a stationary regen...driving truck a few days after, Service ElectronicThrottle Control came up and truck does not do above 40mph...Mechanic changed Cat Temp sensor but did not have the proper scan to clear code....not...
Anyone out there have experience or have seen/heard options for getting the swirl valves, electronicthrottle body deleted? looking for which tuners have this option
I have a leak at the turbo coolant feed line so the intake has to come off anyhow, egr and all is coming off since the intake is...
Mine came on. Took it to the dealer and had to replace the entire fuel system at the cost of $12k. They said it was bad fuel. Coincidently, there is a recall on the heavy duty diesels for the EXACT same problem.
I haven't experienced that specific issue but several times while underneath my truck changing oil I noted that the wiring harness connector had been pulled from it's attachment point on the frame and was dangling in the wind. I pulled the connector apart, applied electrical connector cleaner...
...within 20 minutes my truck was thrown into limp mode. Service Shifter was the first wanting, then Service Transmission, service electronicthrottle, service electronic braking. Now when these lights come on, I can park and shut my truck off, wait 30 minutes and start it up and drive fine...
I have a 2014 with a 100% delete kit and 62,000 miles. I got a message on my dash for an electronicthrottle control issue. It goes into limp mode right away after start up and after clearing codes. We found that I blew a hose from the EGR delete right off the turbo. We got that caped at the...
Is it just me or… or is the exhaust filter a scam that dodge used to be environment requirements? If we have to run at Hwy speed to burn it off, isn't what’s been filtered just ending up in the sky at the end of the day anyway?
...of conditions and each must be investigated to find what is causing the DTC to light the CEL.
I like to refer to the Service ElectronicThrottle Control message which sets a DTC and then sends the ECM, Engine Control Module, into Limp Home Mode which then causes a multitude of DTC's to set if...
...what is the CEL for, have they told you? Most of the issues I have had with my eco have been stupid programming from FCA. Service ElectronicThrottle being the biggest headache, chasing down dirty connections, tensioned wiring harnesses, final cure GDE Tune, now with an EPA certified tune...
When truck gets to half a tank of fuel
loose power ,engine shuts down engine light comes on ,service electronicthrottle control, oil pressure flashes.
I read this is happening to other eco diesel trucks I cleaned map sensor still happening.. Any suggestions truck started doing this at 35,000...
I would take it to your dealer for a diagnoses. Many things can trigger the "electronic throttle control" light. I've only had that happen once. According to the dealer, the MAP sensor needed to be replaced. It was repaired under warranty. I now change or clean my MAP sensor once every...
The "electronic throttle control " service light came on and now my 2018 1500 eco diesel slowed way down/ lost power...what did i do ? And how do I fix this?
So I got the dreaded "service electronicthrottle control" message while on a family vacation 1000 miles from home. It initially happened pulled our boat out of the water. Out of habit I put my foot on the brake while accelerating due to the ramp being steep and having older vehicles before. The...
My 2015 EcoD threw a P2138-00 code and the dealership said my pedal position sensors failed. They want $914 total ($370 parts and $424 labor then tax and fees). After finding the same part (Mopar's #53034160AE) from another dealer for $280 I am fixing it myself. Seems like it is two nuts and a...
My 2015 EcoD threw a P2138-00 code and the dealership said my pedal position sensors failed. They want $914 total ($370 parts and $424 labor then tax and fees). After finding the same part (Mopar's #53034160AE) from another dealer for $280 I am fixing it myself. Seems like it is two nuts and...
I don't know the code it is still under warranty thru December but Ram engineers have been working with the dealer but everything they have tried (like 4 different things) has not been successful.