Search results

The epa has caused a lot of heartburn around aftermarket performance upgrades

Sounds like tone ring failure to me

Sounds like your tone ring failed. The oil pressure light came on because the truck failed to continue running and it detected no oil pressure when it should have been (engine off but was running before). Can you hear your intank fuel pump run if you leave your foot off the brake and push the...

You will need to buy a bypass cable

Yes you will need to contact a tuner for the ecodiesel to explain your situation and your wants and they can get you squared away!

My guess would be the map sensor? If you pop your cover off the top of your engine it is near the egr inlet tube on the manifold. It normally gets caked in soot these are pictures of the egr diffuser tube that go into your intake, the map sensor is located nearby so you can imagine how it will...

Possibly. Tcdiesel would have more insight on that.

Hmm. I wonder if they switched a hose somewhere and coolant is constantly flowing or if the fan never shuts off… I’m stumped

I wonder if your sensor could be out of range

what about while you are driving? Diesels don’t like heating up at idle.

That has a lot of variables…

Possibly the grille shutters not closing and opening? What temp are you looking to achieve?

aFe Power 44-LF035 PRO GUARD D2 RAM 1500 EcoDiesel Oil Filter https://www.amazon.com/dp/B00VKQIGSQ/ref=cm_sw_r_cp_api_glt_fabc_RD1X0CJXT594A6D9HZC9 I’d try afe

I think when he drilled he used hole saw lol

He drilled port for egt sensor and it’s bound up 🤦🏻‍♂️ Think it’s a 12 not sure

Possibly if you told it that was not an option, I’m going to try it on an engine brake on a 2500 soon to disable it

Welcome! Sounds like it is in limp mode. Going to need you to Check the codes and report back! I’d take it back to the dealer though.

In tank level sensor failed maybe?

It’s broke… had to break, drill and tap mine out. Well I took it to a diesel shop.

Hm, it may be losing prime. I don’t think mine runs that long. You can try the same procedure 3 times then attempt to start. Have you serviced the fuel filter? Are any codes present?