• Welcome to EcoDieselRam.com We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your EcoDiesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • We believe in quality OVER quantity, and a family friendly place for your #EcoDiesel home!
    CLICK HERE TO REGISTER! Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Blown Eco Diesel engine

Muddhogg

New Member
Joined
Mar 20, 2016
Messages
11
Reaction score
7
Truck Year
2015
Two weeks ago while driving down the highway, all of a sudden it sounded like someone had tossed a handful of marbles in my engine. Shut it down and had it towed to the dealership. After talking to the Service rep they said that the tech said that the engine was blown. The fix was a new motor. It was something to do with the "lower engine bearings". After a couple of days the Service rep is telling me that now they are tearing the engine down and sending pics back and forth to Chrysler. I am still waiting to hear back from them and I'm getting a little bit frustrated.

My question is has anyone had something like this happen to there Eco Diesel or dealt with Chrysler on this type of matter. I'm being told that this could go either way with an new motor or rebuilding the motor. Any thoughts??
 
Two weeks ago while driving down the highway, all of a sudden it sounded like someone had tossed a handful of marbles in my engine. Shut it down and had it towed to the dealership. After talking to the Service rep they said that the tech said that the engine was blown. The fix was a new motor. It was something to do with the "lower engine bearings". After a couple of days the Service rep is telling me that now they are tearing the engine down and sending pics back and forth to Chrysler. I am still waiting to hear back from them and I'm getting a little bit frustrated.

My question is has anyone had something like this happen to there Eco Diesel or dealt with Chrysler on this type of matter. I'm being told that this could go either way with an new motor or rebuilding the motor. Any thoughts??

From what I've seen here on on our facebook page, usually they put in a new motor and then the dealer just sends the old one back and usually the customer doesn't know what happen to it.

If you're still under warranty, I would fully expect a new motor.
 
That is what she said on Saturday. Then on Tuesday she told me that Chrysler wanted them to tear it down and find out what caused the problem at the dealership. They have been sending pics to Chrysler and they keep going back and forth on what the problem is. That is when she brought up the possibility of Chrysler having them rebuild the motor.
Was just wondering if this has been something that has been a problem or just in a handful of engines since it is still fairly new. Will just keep my fingers crossed that this is resolved sooner rather than later. Love the truck.

Thanks for any help.
 
That is what she said on Saturday. Then on Tuesday she told me that Chrysler wanted them to tear it down and find out what caused the problem at the dealership. They have been sending pics to Chrysler and they keep going back and forth on what the problem is. That is when she brought up the possibility of Chrysler having them rebuild the motor.
Was just wondering if this has been something that has been a problem or just in a handful of engines since it is still fairly new. Will just keep my fingers crossed that this is resolved sooner rather than later. Love the truck.

Thanks for any help.

This is the first I've heard of this.. Perhaps it's something that may be more common for the future. Hopefully not.
 
Everything I've read is just replace replace replace. But now maybe FCA is actually trying to figure out the causes, whether a failure do to design or manufacture, and remedy them instead of a quick (relative term lol) and quiet engine replacement?
 
Let's just wait and see. I will be contacting them tomorrow for an answer and if nothing from them I think I will get in contact with Chrysler to push things along. A waiting game I guess.

Thanks again.
 
Get a loaner in the meantime?
 
Have a rental that they are picking up the tab on.
 
Have a rental that they are picking up the tab on.

Hopefully it's something comparable, even if it's a Hemi. Some guys aren't so lucky in that area either.
 
Yes it is a Hemi. Fuel mileage is terrible. The sad part is no hitch for towing the boat. That will have to wait I guess.
Heard from a Chrysler rep today after I opened a claim with them yesterday. Seems all they wanted to do was blame the dealership for the slow response. Let them know that it was not them as they were ready to drop a new motor in and that it was Chrysler slowing this down. Let her know that someone needed to give me an answer as to when things were going to be done. I am not in the mood to have this drag out for any length of time. Just want to get the boat back in the water.
 
No hitch? Can't you just grab the ball from your truck?
 
I think he means no receiver...common for them to be removed on loaners and rentals. I can't imagine why ;)

I imagine it's a liability issue, of some sort.
 
Heard back from the dealer today. Chrysler has approved a new motor for my truck. Still don't know what happened as all I got was a voicemail from them. Hoping to find out more tomorrow. They have the motor at the dealership, but they have to wait for the gaskets to show up (they are coming from Italy). Hopefully that won't take to long. Glad this is now heading in the right direction.
 
Reads like your case is moving along faster than a few others I read about.

That's no comfort to you and probably, there is only the comfort that something is being done to make it less difficult.

Sure hope it works out and soon.
 
Received the call yesterday that my truck is ready. Will pick up today. All she could tell me as far as the problem was it was the lower engine bearing that spun out. Brand new engine installed along with a new turbo. Apparently that was also showing signs of damage.

I will have more later when I pick it up and have a complete list of what they did.
 
4week turnaround is pretty good. I hope she is problem free and drives great.
 
Back
Top