• Welcome to EcoDieselRam.com We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your EcoDiesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • We believe in quality OVER quantity, and a family friendly place for your #EcoDiesel home!
    CLICK HERE TO REGISTER! Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Homebrew Rod Rack

Brady

Well-Known Member
Jun 7, 2015
1,050
422
Truck Year
2015
Been looking for a Rod Rack that spans across the bed behind the cab in the stake pockets. Came across several, both DIY and pro built. The nice ones are way out of my budget.
59e3d5c18cb1195e2b4816afdd23a435.jpg

I'll only use this a few times a year for trips to the coast and Lake Erie. Decided to build one. Keep in mind my skills are elementary lol.

$35 with of steel. 1-1/2" square and 1-3/4" round tube, both 16gauge I believe. About 32' of it. Enough for 2 or 3 racks maybe. Not that I'll build more then 1 haha.
42c59b9e0b79808e088da35f73a3cd5e.jpg


Cut out the stake pockets using a razorblade, scoring the outline until she snapped out. Outline is not actual hole size for some reason.
95597191213679a35f86ff188b2cdeea.jpg

Cut the legs. 14" length. Just above the bed rails I cut 17degree angles to get it to follow cab lines and rise away from the back glass.
9998610010f1e1620d88c860a9f514d2.jpg

Tacked & test fitted.
a72d4d8275dae0774e1bf6081f6e5f1a.jpg
6113105110c1aef7416b50ff9205db60.jpg
b72bee2918b94d350363f941fdd9cbbb.jpg

Rough finish weld.
516b0a3a4f0d3c2be4b67c28be7f7c1f.jpg


That's where I stand now. Cross bar and Rod holders coming soon. I'll also need to sleeve the base as the stake pocket is 1-1/2"x2" and my material is square 1-1/2". And need to figure out how to secure it through the access hole inside the bed as well. I'm thinking some kind of cam lock. Anyhow, I'll update as I progress. Thanks for looking.


-Brady
 

Brady

Well-Known Member
Jun 7, 2015
1,050
422
Truck Year
2015
78545be6e14ff0677100de28792bb218.jpg
d3eac08aa2933b7a9d69f698cd522300.jpg



-Brady
 

Brady

Well-Known Member
Jun 7, 2015
1,050
422
Truck Year
2015
Made a quick jig to work off the truck and outta the rain.
4e869ddccd15fb2036a1f5fe53ca09b2.jpg
fd01943a8690d30c8118a76dc89d7263.jpg



-Brady
 

Brady

Well-Known Member
Jun 7, 2015
1,050
422
Truck Year
2015
Crossbar tacked. Lines up nice & plumb shockingly. With the tubes mounted it should be under 30lbs. I can live with that.
8d66715a03115440d7ecf9b7b4786d42.jpg



-Brady
 

Brady

Well-Known Member
Jun 7, 2015
1,050
422
Truck Year
2015
cbec1a2e2e7ba834b314a5670ea4af94.jpg



-Brady
 

Brady

Well-Known Member
Jun 7, 2015
1,050
422
Truck Year
2015
Thanks! It's sturdy for sure. I call it the mid evil rack.

Not sure if I'm going to powdercoat or rattle can it truck bed liner. Ideally, powder coat a light color such as white or sky blue so it doesn't get so blazing hot. Either way, I'll pretty it up. [emoji106]But it's gonna come down to how much either would cost. Trying to stay under $100....


-Brady
 

Brady

Well-Known Member
Jun 7, 2015
1,050
422
Truck Year
2015
Anybody with a cnc machine need a small job??? I need 7 of each....1/8" thick
8f8032da4a8e24faf5a06b52d8f2de35.jpg
d23f07498b24b82a0f840de79b924976.jpg



-Brady
 

Brady

Well-Known Member
Jun 7, 2015
1,050
422
Truck Year
2015
Tubes notched...
d7d1f84edd4cce661f15793c11597d47.jpg
6c42f500901c7f50d4125e8d519f8a07.jpg



-Brady
 

BoostN

Administrator
Staff member
Administrator
Jul 27, 2013
4,288
1,127
Truck Year
Not Listed
Thanks! It's sturdy for sure. I call it the mid evil rack.

Not sure if I'm going to powdercoat or rattle can it truck bed liner. Ideally, powder coat a light color such as white or sky blue so it doesn't get so blazing hot. Either way, I'll pretty it up. [emoji106]But it's gonna come down to how much either would cost. Trying to stay under $100....


-Brady

Yea, I would say that cost would be well over $100 for that powdercoat option. Either way looks good and keep us updated.
 

Brady

Well-Known Member
Jun 7, 2015
1,050
422
Truck Year
2015
Yea I'm just about at $100 with the material cost. $35 for the steel and I found a machinist to cut my brackets for $55 shipped. So a good rattle can job will be put me slightly over budget but still darn close. And thank you, will do. Work will be slow for a week or so until brackets are here, but I'll post as more work is done.


-Brady
 

jdn112011

Well-Known Member
Oct 18, 2015
1,242
336
Truck Year
2015
Never seen one of those but it's a good idea and for 100$ it's lookin good. Functionality is key!
 

jdn112011

Well-Known Member
Oct 18, 2015
1,242
336
Truck Year
2015
I personally would've Used PVC for the tubes and then utilized a metal frame. even being well painted and whatever you do, the metal will retain water more and rust inside the tubes. And unless you're using very expensive DOM (drawn on mandrel) steel then the weld seam is going to tear apart your rods in time. Foam or cork. And stain your rod handles with rust
 

Brady

Well-Known Member
Jun 7, 2015
1,050
422
Truck Year
2015
Lol well PVC just wouldn't jive with my mid-evil overbuilt theme I have going on. But the tubes are cold rolled, no weld seam. Not sure I coulda figured out a way to join the plastic & metal anyhow. You are right tho, this thing will have some rust no matter what I do. But being as its use will be very limited, I'll deal with that.


-Brady
 

jdn112011

Well-Known Member
Oct 18, 2015
1,242
336
Truck Year
2015
You just would've needed a little extra steel and some variety, and a whole saw. You know how you extended the uprights a second time? Then instead of using a single cross member use two, an upper and a lower. Use two inch square or rectangle, have the upper one pass all the way through and the lower only through one wall so it stops, or somethin like that.

I don't mean to impose on your midevil build it's good, I just would be very bothered by the rust staining rods
 

Brady

Well-Known Member
Jun 7, 2015
1,050
422
Truck Year
2015
Lol no offense taken. You have a good idea. Ideally aluminum would've been my choice. Using a tube bender and a notcher and I could've gotten surgical with it. BUT I lack the tools and knowledge for that scenario.


-Brady
 

Brady

Well-Known Member
Jun 7, 2015
1,050
422
Truck Year
2015
Finally received my brackets from Ballard Fab out of Marysville Ohio.
024eda015c46d54c977e3d607fd3c634.jpg
a0acada73fca694141849ad32e00cc56.jpg

Tacked in place.
c7673777e19b22ed08da4cca148fb0d4.jpg




-Brady
 

Brady

Well-Known Member
Jun 7, 2015
1,050
422
Truck Year
2015
c51de07641e995537f142a046c69f074.jpg
4306c9267e41f918612750ca77c3fff7.jpg
9600d33060c8712bb1d3ebb2948b44ca.jpg



-Brady
 

Brady

Well-Known Member
Jun 7, 2015
1,050
422
Truck Year
2015
Yea, kinda like a heck with it snap decision I went with this lineup-
884bda4a028966da805d8a459bcfcf6e.jpg

I'll use the undercoating for the tops of the tubes where the reels slide in and on the legs that slide down into the stake pockets on truck. We will see how the blue turns out lol.


-Brady
 
Top